Misverstand 1: Bulkdichtheid (bulkdichtheid) hoe groter hoe beter
The main chemical components of ceramic fiber are AI2O3 and SIO2, which are made by silk technology. Ceramic fiber blankets, ceramic fiber modules, and ceramic fiber folded blocks adopt the method of fiber interweaving to form a void unit structure. Within a reasonable bulk density of 200kg/m3-220kg/m3, the bulk density increases, the thermal conductivity gradually decreases, and its heat dissipation loss will gradually decrease. However, if the bulk density is excessively increased to 240 kg/m3, the cell structure performance of the pores will also decrease, the thermal conductivity will increase instead, and the heat loss will increase. Therefore, one-sided pursuit of too high bulk density is not advisable.
Misverstand 2: Hoe strakker het met vezels gevouwen blok, hoe beter
De installatie van de keramische vezelmodule is een integrale structuur die wordt gevormd door rijen van in elkaar gedrukte vouwblokken, compensatiedekens tussen rijen en vlakke rugdekens. De installatie van keramische vezelvoering besteedt aandacht aan het totale effect. Alleen als het algehele afdichtingseffect goed is, kan het dak van de keramische vezeloven niet uit de wind komen en brand lekken.
Overmatige extrusie zal ervoor zorgen dat het oppervlak van het plafond van de keramische vezeloven ongelijk is en dat het eindoppervlak niet kan worden afgevlakt. Dit zorgt ervoor dat de aan het uiteinde geïnstalleerde compensatiedeken niet stevig wordt samengedrukt en dat er een doorlopende naad is op de kruising van de rij en de rij, die waarschijnlijk brandlekkage veroorzaakt en het ovendak aantast. Het algehele afdichtingseffect en de levensduur van het ovendak.
www.suntherm-industry.com






